Technics Full Auto Record Player SL-10 P310MC Near Tracking Tone Arm

Description: Product description A fully automatic player developed using Technics player technology in a record jacket size with a width and depth of 31.5cm. A linear tracking tone arm is adopted as the tone arm. The linear tracking arm uses a highly precise DC motor for arm movement, which is controlled by a microcomputer. In addition, by adopting a slide bearing with a low coefficient of friction, we have achieved quieter and more accurate arm movement with no unnecessary vibrations than methods that use ball bearings or rollers for arm movement. A unique optical sensor (optical non-contact method) is used to detect the arm declination angle, and by detecting it at the tip of the arm, it enables more accurate control than the detection method using the bearing. The bearing part uses a gimbal suspension structure with four-point support using pivot ball bearings, and the ideal structure in which the tone arm moves around one clear point provides the same high sensitivity in all directions. Masu. In addition, by adopting a unique dynamic balance method, strict horizontal adjustment of the cabinet is no longer necessary, and when used in conjunction with a stabilizer, stable record performance is possible at any angle. The turntable drive unit employs a unique integrated structure D.D. that integrates the motor rotor and turntable, pursuing mechanical precision. Furthermore, high precision rotation performance is achieved by adopting quartz control and all-around detection F.G. Equipped with a microcomputer-controlled fully automatic mechanism that consolidates all operations into four buttons. As a result, simply by setting a record and pressing the start button, the rotation speed will be automatically set according to the record size. In addition, the rotation speed can be changed manually to accommodate records with special rotation speeds. The arm has an auto-return design that automatically returns to the armrest after playing. Additionally, if you open the upper cabinet while playing, it will return to the armrest. The cartridge uses 310MC, which is an MC type cartridge. This cartridge is newly developed for the SL-10 based on the Technics 305MC, and uses a pure coil without an iron core, a coreless twin-ring coil structure, a pure boron pipe cantilever, etc. to achieve a light oscillator effective mass of 0.23 mg. and enables wideband playback. In addition, a unique plug-in connector method is used to connect the tone arm, so it can be connected by simply inserting it directly into the tone arm and securing it with screws, eliminating the need for adjustments such as stylus pressure. Built-in MC pre-amp with low noise design. In addition, MM/MC switching is possible with the rear bypass switch. Equipped with a muting function that uses a relay and delay circuit to eliminate noise at the moment the stylus touches and leaves the record. Both the upper and lower cabinets are made of precision aluminum die-casting, and combined with a compact design that resists sound pressure, improves howling resistance. In addition, the back of the turntable is deadened with rubber to ensure no vibration or resonance. The power supply section uses an AC/DC dual power system, and can be powered by a battery in addition to AC power. A donut disk adapter is built in around the center spindle. It can be stored inside the turntable when using LP records, and can be easily popped up when using EP records. ●Main specifications Drive method Direct drive Drive motor brushless DC motor Control method Quartz phase locked control Turntable aluminum die-cast, diameter 30cm Rotation speed 33.1/3, 45rpm, auto select (manual available) Rotation speed deviation within ±0.002% Wow/Flutter 0.025%WRMS(JIS C5521) 0.012%WRMS (characteristics of rotating parts only) ±0.035%Weighted zero to peak(IEC98A weighted) SN ratio 78dB(IEC98A weighted) 58dB(IEC98A unweighted) Type: Dynamic balanced linear tracking arm Gimbal suspension bearing structure Arm effective length 105mm Tracking error angle within ±0.1° Arm effective mass: 9g (including cartridge) Arm resonance frequency 12Hz Arm drive motor DC coreless motor SN ratio 70dB(IHF-A) Frequency characteristics 20Hz~20kHz ±0.5dB Rated output 2.5mV Distortion rate 0.02% (at rated output) Power supply AC100V, 50Hz/60Hz DC12V Power consumption 16W External dimensions Width 315x Height 88x Depth 315mm Weight 6.5kg ★The condition of the product is that there are no noticeable scratches. Although it is a working item, it is an old item and may have defects, so please bid only if you understand this. For "remote delivery areas", additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". -US and International government regulations prohibit such behavior.

Price: 864 USD

Location: Naga-shi-mizu

End Time: 2025-01-05T01:00:06.000Z

Shipping Cost: 0 USD