SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v SMTD1500

Description: NOTE: DUE TO THE HOLIDAY CLOSURE, ACC WILL ONLY BE SHIPPING UP UNTIL 12/20 A.M. ACC WILL RESUME SHIPPING 1/6/25. Feel free to place an order now, but know it would not ship out until after ACC reopens 1/6/25. More info at: Spa Pumps And More________________________________________________________________________ SMTD1500 NEW hot tub controller, with electric high flow 2" heater, by Applied Computer Controls, ACC model 'ePack' SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15" stainless steel high flow heater, 2" pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Full Factory Warranty from the manufacturer, ACC, great product, reliable, easy to install. We have sold a ton of these over the past 15 years, probably the best 4000 watt heater and control combo available anywhere. Main control box is 11.5"Tx14"Wx4.5"D approximately. Shipping is via UPS Ground. Note: Signature can be required on higher value items, depending on the ship to location. From Spa Pumps And More, please check out our other great deals. Comes with KP-1000 top side keypad/display, it is 2.5" x 5.5" and drops into a 1.7" x 4.7" cutout. You will receive the 2.5" x 5.5" if you order from this listing For more information look at Spa Pumps And More Their part number is SMTD1500Alternate part number is ePack Manufacturer's Specs: Model: ePack SMTD 1500 Display: Digital Topside Keypad 2.5x5.5" Heater: High Flow 2" 15 inch 4kw Dimensions: 11.5T x 14W x 4"D Voltage: 240V 4-wire standard. Convertible to 115V optional. Warranty: 2 YEARS Factory Warranty by Manufacturer Country of Manufacture: United States Type: Pump, Air Blower OR second pump, and Light Domestic Product: YES Includes: Power Cords, User Manual & Warranty card Brand: Applied Computer Controls ( ACC) Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply (There is a larger top side available at slightly higher cost, it is the KP-2010 and is 3.25" x 7.25" and drops into a 2.2" x 6.2" cutout. If you are interested in this, see our other listing for the ePack with KP-2010 top side) For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. 2 year factory warranty. new in box with manual, warranty, cords (pigtails), a complete unit. nice big clear display. not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are: Incoming power 230v 4-wire (can be 115v) High Flow 2" Heater 230v (can be 115v) Main 2-speed pump 115v (can be 230v) Air Blower 115v (can be 230v) (or can be the on-off for a second pump) Ozonator 115v (can be 230v) Light 12 volts only If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2" or 1-1/2" PVC pipe size. It is NOT for tiny 3/4" circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Warranties do not cover freight costs. Standard stuff, but just fyi, so you are aware. Shipping is to your US street address in lower 48 states, no P.O. Boxes, sorry. ask before you buy if you have a question. thanks for looking! More details at Spa Pumps And More

Price: 433 USD

Location: Los Angeles, California

End Time: 2024-12-22T01:13:38.000Z

Shipping Cost: 19 USD