Description: 3D Printed slipper eliminator for the Losi Mini T 2.0 & Mini-B Does not work with a metal spur set up Locking the slipper significantly boosts power, punch, and control. This component reduces 0.9g of direct rotational mass, leading to cooler motor operation and enhanced acceleration. Install Instructions 1. Keep the slipper plate that is closest to the gearbox, remove both slipper pads from the stock spur gear, and mesh this piece into the hex pattern on the gear. 2. A square relief is on the underside that mates with the square protrusion on the gearbox side slipper plate. 3. Use the stock nut to tighten it all down snug - not too tight as this may push the gear off center and create a wobble. 3D Printed Easy to use
Price: 5.75 USD
Location: Maspeth, New York
End Time: 2025-01-12T18:22:23.000Z
Shipping Cost: 1.95 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: ulovemydeals
MPN: Does Not Apply