Description: K.1053 Dual Port/Dual Handpiece Kit: Collet Size 3/32"1- Brushless rotary handpiece connects to Port B located in the back of the control box. It runs virtually vibration free with high torque throughout the entire speed range of 1,000-50,000 rpm. See additional specs below.2- Brush type Hammer handpiece operates at 1,000 - 2,500 strokes per minute. Connects to Port A in the front of the control. See additional specs below.Sophisticated control box with digital display, variable speed foot pedal, 2 handpiece cradles, and an extra fuse also included. See additional specs below.Overall Product Features- Two Year Limited WarrantyBrushless motor design carbon brushes NEVER need changingMaximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speedsSealed housing eliminates dust, noise, and vibrationAdditional port for Brush Type Micromotor Handpiece: This brushless micromotor is ideal for various applications at high, medium and low speed. High Speed Applications: Running at high speed, it provides smooth, clean, and sharp detailing in metal and wood. It's also great for bright-cutting, grinding, finishing, texturing, and polishing. You never need to changes the brushes on this handpiece.Medium Speed Applications: At medium speeds it is ideal for effortless and fast stock removal in wood, diestone, or acrylics.Low Speed Applications: The low end offers extra control and power for stone setting and milling. HP4-817 Control Box and Front Panel LED Specifications and Features-50/60 Hz, 100VA, 5.4" wide, 9.1" deep, 7" highDial speed control sets precise speed and torqueAuto cruise, Forward or Reverse rotation, Dial or Foot speed controlDigital display for precise speed and torque settingsBuilt in overload protectionBrushless micromotor handpiece connects to port on back side of control boxBrush type handpiece connects to port in front.H.MH-150 Brushless Handpiece/Motor Specifications and Features -6.3" long, 1.06" motor diameter, .75" grip diameter, 8.4 oz/237.7 gr., 115 voltErgonomic and brushless with long-lasting ceramic ball bearingsBur changes are quick and easy with a simple twist of the front section of the HandpieceComes with 2.35mm (3/32") HPMH-011 Brush type Hammer Handpiece/Motor Specifications and Features -6-1/4" overall length, 9/16" grip diameter, 1" motor diameter, 13oz/369 gr., 1.5 amps (115V) .75 amps (230V)This Hammer Action micromotor is ideal for stone setting applications and engraving techniques. It has a slender contoured grip and impact adjustment ring for precise hammering work. Operates from 0-2,500 strokes per minute. The force of the impact of the MH-011 reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed of the hammer action can also be varied from 0-2,500 strokes per minute with the dial on the control unit. Used with the supplied Graver Holder, the handpiece becomes a precision power engraver- no need for an air compressor or a flexible shaft drive.Handpiece Accessories:3-Anvil Points with Threaded Shanks p/n HP10177K1-Adapter for Threaded Anvil Point p/n HPH8-32 (installed)1-Adapter for Non-Threaded Shank Accessories p/n HPH8-351-Graver Holder with Allen Key p/n HPH8-214. Screws into the front end of the handiece and converts it into a power engraving tool. Comes with 5/64" allen key (graver not included).1-5mm Open End Wrench p/n HPH8-38, Accessory Tray p/n A-AT-1, Handpiece Cradle p/n HP4-933, Spare Motor Brushes p/n HP813514, 2 Pins used to tighten Anvil Points, 1-Anvil Point Holder used for shaping the point.
Price: 1424 USD
Location: Clearwater, Florida
End Time: 2024-02-20T15:59:01.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
MPN: Does Not Apply
Brand: Foredom
