Digital Cooking Cube Timer Desktop LCD with Gravity Sensor Led Display for Time

Description: Digital Cooking Cube Timer Desktop LCD with Gravity Sensor Led Display for TimeFEATURE：👉Smart Chip:The timer adopts a gravity sensing smart chip, which can flip and set the countdown and quickly respond to operations. If you forget to turn off the Cube timer and there is no action after 5 minutes, the product will automatically standby and become low battery consumption. 👉LED Display:The timer has a HD display screen, which is more convenient for you to control the time and is suitable for various scenarios, giving you a better user experience。 👉Two Countdown Modes: Gravity sensing & Manual set - gravity timing range of 5,10,30,60 minutes, and manual mode timing range of 1-99 minutes. 👉Beep reminder:Three modes can be set. Vibration/low volume/high volume, more suitable for use in multiple scenarios. 👉Rechargeable: The Cube Timer is built a 500 mAh battery, with a lifespan of approximately 6-8 months and an ultra long battery life. PRODUCT PARAMETERS:Battery capacity: 500mAh, Working temperature: 0°C-50°C, Standby power consumption: <20uA, Sleep power consumption: <150uA, Working current: 11mA, Charging current: 500mA, Volume level: mute/vibration, loud 90~100DB, soft 70~80DB; PRODUCT OPERATION INSTRUCTIONS: Gravity mode: Switch the button to mode 1 Flip 5-10-30-60 minutes upward, automatically start countdown, flip the screen upward to pause, reverse the screen downward to clear the timing Manual mode: Switch the button to mode 2 Adjustable M/S key, press the middle button ST/SP to start countdown Countdown: 1. When the display is 00: 00, short press the [SP/ST] key to start counting; ⒉During the timing, short press the [SP/ST] key to pause/start counting; 3. In the pause state, long press the [ST/SP] key to clear. Countdown setting: 1. Short press the [M/S] key to adjust the countdown time incrementally, long press the [M/S] key to quickly adjust the countdown time incrementally. After setting, short press the [SP/ST] key to start the countdown; ⒉ During the timing process, short press the [SP/ST] key to pause/start the countdown; 3. In the pause state, long press the [SP/ST] key to reset; 4. After the countdown time reaches 00:00, there will be a one-minute alarm ("di di di" LED screen lights up/sound stops LED screen goes out-these two prompts are 1 second a group-this cycle) reminder. Silent mode vibration reminder. 5. Memory mode: After the countdown ends, short press the [SP/ST] key again to display the current set time. If you need to reset, long press the ST/SP button. Short press again to cycle the operation. 📝NOTES: 1. If the user forgets to turn off the product, or there is no operation after 5 minutes, the product will automatically sleep; 2. After the countdown/countdown ends, the alarm duration is 1 minute; 3. After sleep, if the power is not turned off, the gravity mode can be turned on and the manual mode can be adjusted with one click; 4. In silent mode, there is vibration feedback when the timing ends or any operation. There is a "beep" feedback when operating in volume mode; 5. When the battery is less than 10%, the screen flashes to remind you to charge. The red light is on during the charging process and the green light is always on when it is fully charged. PACKAGE INCLUDES: 🎁1 x Cube Timer 🎁1 x USB Cable 🎁1 x User Manual BrandUnbrandedTypeDigital TimerStyleModernUPCDoes not applyFeaturesAdjustable, Count Up, Digital, ElectricMaterialPlasticMPNDoes not applyPower SourceUSBBattery capacity:500mAh,Working temperature:0°C-50°C,Standby power consumption<20uA,Sleep power consumption:<150uA,Working current:11mA,Charging current:500mA,Volume level:mute/vibration, loud 90~100DB, soft 70~80DBCountry/Region of ManufactureChina

Price: 14.55 USD

Location: Shenzhen

End Time: 2025-02-04T04:37:57.000Z

Shipping Cost: 0 USD