Description: These are Single Shot trays that work with Benjamin akela, Cayden and Kratos in .22 cal only. pull tab for removal convenience.Carbon Fiber polycarbonate material is 100% fill and solid This is intended to be used for individual loading of pellets or slugs up to 11.50mm in length 12mm may be at the razor's edge of length that would fit.Instructions: slide in and press down as sliding until it seats flush on the left side if inserting from the right press down firmly and engage the bolt slowly to make sure aligned first. This is a friction fit.These are very durable 100% filled and solid no skimping here should last as long as you with proper use.Air rifle pictured is not included and only for demonstration of the product, you will receive the single shot tray only.DISCLAIMER: The craftsman line of rifles was not intended for a single shot tray so the probe is designed in a way that leaves a big opening that a pellet can fall into if loaded canted at an angle muzzle upthis could lead to a pellet becoming lodged in action, recommended only for bench rest shooting as purchasing this you assume all liabilities. The tray has been redesigned to limit opening as much as possible to prevent this but can still happen.All items are individually made and checked defects are highly unlikely and due to the nature, no returns or warranty offered sold as-is. prior to shipping items sanitizedDue to it being 3d printed although very high-quality prints there are very small lines very rare some bumps that are normal.
Price: 12.8 USD
Location: Polk City, Florida
End Time: 2024-01-12T16:01:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: hotsnot
MPN: na
Type: Rifle Parts
