Andrew Garfield 1/12 Head SpiderMan for Defult ML (joe Vaaverse)shipped within 7

Description: SpiderMan 1/12 Head Sculpt Andrew Garfield Preorder Products will be shipped within 7 Day. This is a handmade. it is a resin and Finished paint The head holder hole is wide for defult Marvel legends ,some body G.i joe, Valverse body. Up to you for custom. it is not fit. You can use patafix pro power to help you put on your head. Note : the head is defult marvel legends. Head insertion 1. Use UHU patafix because we can still swap the head with other BODY. 2. Use an epoxy sculpture to adjust the hole size to match the joint's head. Recommended to follow this clip. https://youtu.be/m5YPr73I6bk There are two methods of removing the figure head. Method 1: Using a hot dryer Blow around the head to distribute heat on all sides. Use your hand to pull it out, if it doesn't work, don't force it. heat it up again. And doing this repeatedly, it will be removed. Method 2: Use hot water Prepare water in a ceramic mug. If there is a microwave, take into microwave or heat water from an electric kettle Dip your head in and soak for 40-60 seconds, depending on the type of plastic. Then pull it out. If it doesn't work, don't force it. Dip your head in hot water again. Do this over and over and it will remove it. note In the case of a soft-necked joint figure, hot water should not be allowed to touch the neck. Dip only the head and pull it. Keep doing this. Dip for about 1 minute. Take for example the TOYBIZ tobey Spider-Man figure. After removing the head We want to take it in and out easily. Should polish the head hole wider. How to polish the head hole 1. sandpaper. Wrap the stick and spin it around. but it will be slow 2. Mini Electric Grinder. There are many models depending on budget. Note: Loose joints action figure, don't forget KIKI for loose solution.

Price: 27 USD

Location: Wangthonglang

End Time: 2025-01-13T08:55:43.000Z

Shipping Cost: 8 USD