6 pk of Auto Transport Flip Plate Hinge Brackets For Tie-Down Wheel Strap Hooks

Description: Six Pack - (6) Auto Transport Flip Plate Hinge Brackets For Tie-Down Ratchet Wheel Strap Hooks Our Flip-Plates eliminate the need to drill or cut holes to hook straps into your decks. Weld on with the two supplied hinge brackets where you need extra spots to hook on and you are ready to load, secure and go! Don't point-load your hooks! Weld this flip up plate to hard-to-reach spots on your Cottrell, Boydstun, Delavan, Wally Mo, Miller or Sun Valley trailer. Stop point-loading hooks in your flippers!These kits will allow you to set your hooks so the force of the load is held in the U-shaped valley of the hook where it belongs, not torquing on the point of the hook. Each kit includes 2 Steel Collars, 1 flip-up strap grabber 14" wide 4" high.Hole size is 1" + inside of point to inside of point of star.Plates are E-coated....3 thousandths of penetration.Don't need paint unless you want to.Weld-on clips are not E-coated black, because welders will grind this off anyway.Good place to put these:On metal flippers... some people weld these to the absolute end of the flipper so they'll have a place to get a hook in properly.Over tandemsAnywhere you can't get a hook in properly. Look at the hinge portion. One solid piece of steel that has been rounded. Compare this to Cottrell, I think you'll like ours better! These are seriously heavy-duty. But, a word of caution: they're only as good as the weld-job you use to install them.What if you need to attach them to aluminum?? Or if you want to bolt them on??To bolt on weld to 1/4" 2 inch flatbar (you provide!) and bolt through that.If you're going to make your own bolt-on flat-bar, make sure you get some rubber inner tube material to insulate the steel and the aluminum. (aluminum and steel don't like to be bolted together... electron transfer between the metals corrodes)

Price: 200.27 USD

Location: Dallas, Texas

End Time: 2025-02-12T22:53:31.000Z

Shipping Cost: 0 USD