5th Gear Lock Nut Retainer Kit for Dodge Cummins NV4500 Transmission 1994-2004

Description: 5 Gear Nut Wrench & Level 5 Gear Lock nut Mounting Assembly,4x4 29 Spline&4x2 31 Spline output， Fit for NV4500&Nv4500hd Model Cummins Diesel Engine 1/2" Drive Spindle (8-pack) Material Made form quality steel, wear and corrosion resistance, anti-rust, impact resistance, sturdy and durable. Package Includes 1 x 5th Gear Lock Nut Retainer, 6 x Lock Nut Kit 1 x 1/2" Drive Mainshaft 5th Gear Nut Wrench. Package Includes 1 x 5th Gear Lock Nut Retainer, 6 x Lock Nut Kit Features: Prevent and repair the factory mainshaft 5th gear issue. The Lock nut retainer is designed to be complete with reinforced, extended splines attached to thick, sturdy walls that will lock the nut to the splines on the main shaft for good. The Nut Kits has reinforced threads on a thick sturdy steel body and has a double locking screw set for maximum grip, just to reinforce 5th gear. 5th Lock Nut Retainer & Gear Lock Nut Kit Easy Bolt-On application. Don't need to remove, or disassemble the transmission assembly. Double Locking Set Screws complete with brass contact pads. Spring Washer helps provide controlled reaction under dynamic load Fiment: Fits for 1994-2005 Dodge Ram 2500/3500 4WD with NV4500 5-speed transmission. Only fits for 29-spline output shafts (for DODGE 4wd models). Does not work with GM/Cheverolet NV4500 transmissions. Installation: 1. Remove transfer case from vehicle, and then remove extension housing from transmission; 2. Inspect for damage to the main shaft, gears & lock nut; 3. Reinstall the locknut on the shaft. Factory recommended torque is 280 ft. lbs (real, real tight, locknut retainer will keep it from loosen again); 4. Slide the locknut retainer over the shaft splines and into the correct alignment position of the locknut (4 Tabs) 5. Tap with a hammer to verify full seated position. Mainshaft 5th Gear Nut Wrench A Must Tool This wrench is required for all in-vehicle and bench repairs that involve mainshaft service, including mainshaft 5th gear replacement. Package Includes 1 x 1/2" Drive Mainshaft 5th Gear Nut Wrench There are 4 slot nuts on the mainshaft output side for GM 4x4 and for Dodge NV4500 transmissions, which retaining the mainshaft 5th gear. Due to these nuts are tightened to the high torque, it's essential to use the correct wrench to remove and install the mainshaft nuts. Note The wrench only fits one way on nut. Be sure wrench is fully engaged in nut slots and is not cocked. 5th Gear Lock Nut Retainer Kit & 1/2" Drive Mainshaft 5th Gear Nut Wrench Suitable for 1994-2004 Dodge Cummins NV4500 Transmission 【Direct use】:Help you remove or install the output shaft / spindle nut of nv4500 and nv4500 HD manual transmission, which exceeds the OEM specification and has passed the factory inspection, making your work easier and more efficient 【High Quality】:It is made of high-quality steel, wear-resistant, corrosion-resistant, rust proof, impact resistant, solid and durable. 【Package Included】:1 x 5th Gear Lock Nut Retainer, 6 x Lock Nut Kit，1 x 1/2" Drive Mainshaft 5th Gear Nut Wrench. 【Fit For】:Fits for 1994-2005 Dodge Ram 2500/3500 4WD with NV4500 5-speed transmission. Satisfaction Guarantee - If you're not 100% satisfied with our 5th Gear Lock Nut Retainer Wrench & Level Set, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.

Price: 103.5 USD

Location: Rancho Cucamonga, California

End Time: 2025-01-18T13:01:22.000Z

Shipping Cost: 0 USD